English
61
already been downloaded from the Internet or if they come
from a reference station that is not connected to the
Internet, like for example an Ashtech ProMark3 base. In
either case, click on Add Reference Raw Data>From File and
select the base raw data files.
• Removing a layer from a map: Select the layer in area [3]
on the screen and press the Del key or click on Remove
Layer.
• Recommendations on folders: Ashtech recommends you
store all the files pertaining to a project in the same folder.
By doing this, you will be able to open your Map files
equally in your receiver and MobileMapper Office software
without losing a single SHP layer.
Post-Processing
Demo
Click on the diagram below to start a short demo on how to
quickly post-process your field data files in MobileMapper
Office. (Under Construction)
To Next Page
Loading...