USER GUIDE XGA LCD PROJECTOR
37
12 TECHNICAL DATA
The technical data given in this section was correct at the
time of going to print, but may change without prior notice in
order to improve product performance.
This projector is designed for indoor use and should not be operated or
stored in conditions outside the general environmental limits given in section
below, as this may lead to permanent damage and will violate any
warranties.
12.1 GENERAL ENVIRONMENTAL LIMITS
Storage temperature
-20 - 60°C (-4 - 140 F), sea level
Storage humidity 10 - 90 % relative humidity, non-
condensing
Operating temperature
10 – 30 °C (50 - 86 F) ambient, sea
level
Operating humidity 20 - 80 % relative humidity
Allow for slow acclimatization after storing at extreme
temperatures and humidities, to avoid condensation. Should
condensation appear, leave the projector unit in a controlled
environment within the operating limits until the
condensation has evaporated before using the projector.
To Next Page
Loading...
