EasyManua.ls Logo

Asko 12605 - Control Panel Overview; Program and Temperature Controls; Function Buttons and Indicators; Safety and Door Operations

Asko 12605
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
2. Open the door by
pressing
If the door does not open,
see below.
The control panelThe control panel
Program control knob Program options Thermostat knob
The program control knob
must be turned clockwise
only.
Indicating
lamp
Lights to show
that the power
is turned on.
Safety device
Ensures that a child cannot change the temperature setting.
Press the button while turning the temperature knob to a
higher temperature (clock-wise). See also page 9.
Door opening
The door can be opened only when the
program control knob is at the end of a
program, as shown by the red mark. If it
has stopped anywhere else, turn it to
position 10 to pump out the water.
Main On/Off switch
Must be pressed in when
opening the door.
Delayed start
Press this button and the
machine will start 5 hours later.
OBS! Check that the main switch is
on, push this button and choose
program.
(The program control knob have to
be on red marks, indicating the
program finishing points, when the
main switch is pressed in.)
No spin
Press this button to omit all spins in all
programs. Programs 14 will pump water out
after the last rinse: programs 6, 7 and 9 will
stop with water still in the machine.
Rinse level
For a normal rinse water level, press the
button. To get Super rinse level, release
the button.
Economy button
Pressing the Economy button
extends the main wash by 22
minutes. This allows you to
reduce the temperature and yet
obtain as good a result as if you
had used a higher temperature
for the shorter period. The
Economy button + lower
washing temperature reduces
pollution, and helps the
environment.
Knob for
centrifugations
spin speed
1. Turn on the main switch
Quickwash button
Use this button for small loads. Pressing
it omits two rinses and the intermediate
spin in programs 13. One rinse is
omitted in programs 6 and 7.

Related product manuals