Asko D5893 User Manual

33
Customer Care Center
1-800-898-1879
www.askousa.com
Installation and connection information
DISHWASHER CAVITY MEASUREMENTS
44 mm
50-105 mm
W = 610 mm
610 mm
H = 34-1/4
"
to 36-3/8
"
2-4"
1-3/4"
W = 24"
24
"
H = 870-920 mm
DISHWASHER MEASUREMENTS *
50-105
610mm
870-920mm
720-800mm
600mm
34-1/4 to 36-1/8”
24”
2 to 4”
23-3/4”
28-3/8 to 31-1/2”
With ll strips** Without ll strips
H minimum
** H maximum H minimum *** H maximum
With toe kick
(see Steep 7)
34-1/4”, 870 mm 35”, 890 mm 33-3/4”, 860 mm 34-5/8”, 880 mm
Without toe kick 34-1/4”, 870 mm 36-1/8”, 920 mm 33-3/4”, 860 mm 35-3/4”, 910 mm
* With ll strips and without plastic feet.
** ASKO XLFI dishwashers can be installed either with or without accessory ll strips depending on the type
of installation. If the dishwasher cutout has been cut to European widths of 23-5/8” (600 mm), the unit won’t
require ll strips. If the dishwasher cutout is a standard 24” wide, we have ll strips that make the unit 24”
(610 mm) wide.
*** Without plastic feet.
Make sure the edges of the cable
hole are even to avoid damage to
the drain and supply hoses and
the electric cable.
Cable hole
H - see table below

Asko D5893 Specifications

General

Brand	Asko
Model	D5893
Category	Dishwasher
Language	English