AlternativesSettings
Adjusting the water softener. Select a setting
depending on the hardness of the water
supply. It is important that this setting is
correct!
0/1/2/3/4/5/6/7/8/9Water hardness10.
See Water hardness in the chapter Before
washing for the first time.
For a water supply with a hardness below
6°dH (10°fH / 7°eH / 1.0 mmol/l), select 0.
The water softener is deactivated and no salt
needs to be added.
Activate this setting when using an all-in-one
detergent that contains rinse aid.
On/OffTAB11.
This setting reduces the rinse aid dosage
and affects how often the dishwasher's
built-in softener is regenerated.
Activate this setting if you want to use
automatic dosing of detergent.
0 ml - 40 mlAuto dose12.
The exact dosage depends on which
program is running. For the Auto program,
the dosage also depends on how dirty the
dishes are.
0 ml (Off)
The Super rinse function rinses the dishes an
extra two times.
On/OffSuper rinse13.
The program time is extended and the
dishwasher uses more energy and water.
Activated in the following programs:
Universal
Intensive
Quick pro
Hygiene
Plastic
Lower half
Upper half
The dishwasher door can be opened without
a handle.
On/OffPush to open14.
Select whether the interior light is to be
switched on when the dishwasher is turned
off and the door is opened. (If is turned
on, the interior light is always switched on
when the door is opened.)
On/OffInterior light at
power off
15.
When Odour control is activated,
Anti-odour can be selected from the program
table.
On/OffOdour control16.
31
Settings
To Next Page
Loading...
