How to fix Er03 error on Asko Hob?
If your Asko hob displays a continuous beep and Er03 flashes on the display, the control panel is likely dirty or has water on it. Clean the control panel to resolve this issue.
What does error code U400 mean on my Asko Hob?
If you see error code U400 and/or a continuous beep on your Asko hob, it means the appliance has been connected incorrectly, or the mains voltage is too high. To resolve this, have your connection changed.
What does error code E3 mean on my Asko Hob?
If error code E3 is flashing on the display of your Asko hob, it indicates that you are using unsuitable cookware that lacks ferromagnetic properties. Use a suitable pot or pan.
What does error code E2 mean on my Asko HI1611G Hob?
If you see error code E2 on your Asko hob, it means the appliance overheated and switched off. Let the appliance cool down, then start it again on a lower setting.
What to do if my Asko Hob displays 'u'?
If the display of your Asko hob shows ‘u’ when you switch on a cooking zone, it means that the pan you are using is not suitable for induction cooking or has a diameter of less than 12 cm. Use a suitable pan.
Why does the fuse blow when I switch on my Asko HI1611G?
If a fuse blows as soon as the Asko hob is switched on, it might be wrongly connected. To solve this, check the electrical connections.
Why does the display keep flashing when I switch on a cooking zone on my Asko HI1611G Hob?
If the display keeps flashing when you switch on a cooking zone on your Asko Hob, the pan you are using is not suitable for induction cooking, or has a diameter of less than 12 cm. Use a suitable pan.
General| Hob type | Zone induction hob |
|---|---|
| Frame type | Frameless |
| Finish type | Gloss |
| Product color | Black |
| Hob width size | 60 cm |
| Top surface type | Tempered glass |
| Appliance placement | Built-in |
| Cooking zone 1 type | Large |
| Cooking zone 2 type | Regular |
| Number of cooking zones | 4 zone(s) |
| Regular cooking zone shape | Round |
| Large cooking zone diameter | 205 mm |
| Number of gas cooking zones | 0 zone(s) |
| Regular cooking zone diameter | 165 mm |
| Number of simultaneously used cooking zones | 4 |
| Boost function | Yes |
| Large cooking zone | 2300 W |
| Regular cooking zone | 1200 W |
| Pan diameters supported | 110 - 145 mm |
| Boost large cooking zone | 3000 W |
| Boost regular cooking zone | 1400 W |
| Control type | Touch |
| Built-in display | No |
| Control position | Front |
| Current | 32 A |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Connected load (gas) | - W |
| Energy efficiency class | - |
| Connected load (electric) | 7400 W |
| Power consumption (standby) | 0.5 W |
| Package depth | 660 mm |
| Package width | 740 mm |
| Package height | 185 mm |
| Package weight | 12100 g |
Weight and Dimensions| Depth | 520 mm |
|---|---|
| Width | 600 mm |
| Height | 56 mm |
| Weight | 10000 g |
| Installation compartment depth | 490 mm |
| Installation compartment width | 560 mm |
| Installation compartment height | 52 mm |
Details the layout and functions of the hob's control interface.
Explains temperature monitoring and protection features to prevent overheating.
Describes the safety feature that automatically switches off cooking zones after a set time.
Guides users on operating the hob's touch-sensitive control panel effectively.
Covers the basics of induction cooking, including speed and power adjustment.
Instructions on powering on the hob and adjusting cooking zone power levels.
Instructions for activating and deactivating the child lock feature to prevent accidental use.
Provides detailed instructions for daily and deep cleaning of the hob.
Addresses common issues, general advice, and a table for problem diagnosis.
Lists specific error codes and their corresponding solutions for diagnosing appliance faults.
To Next Page
