Asko T780 - Page 59

61
SERVICE
Changing the fixing clip for the bottom cover
(female)
1. Remove the bottom cover.
2. Squeeze the snap fasteners and pull or push
out the clip.
3. Install a new clip.
4. Install the bottom cover.
Changing the fixing clip for the bottom cover
(male)
T700/760, Left T720/780:
1. Remove the bottom cover.
2. Squeeze the snap fasteners and pull or push
out the clip.
3. Install a new clip.
4. Install the bottom cover.
Right T720/780:
1. Remove the bottom cover.
2. Remove the condenser housing in accordance
with the section "Condenser housing - remo-
ving...".
3. Squeeze and pull or push out the clip.
4. Install a new clip.
5. Install the condenser housing in accordance
with the section "Condenser housing - instal-
lation...".
6. Install the bottom cover.