11
Anti-crease program
Using the Anti-crease program you can prevent
garments from lying still and becoming unne-
cessarily creased at the end of tumble drying.
This is a helpful option if you cannot take out
garments promptly at the end of the tumbling
phase.
You can choose this option for a duration of
1, 2 or 3 hours. The drum will then continue to
rotate intermittently, ie, three seconds every
minute for the number of hours chosen.
If you choose Buzzer ON, a signal will sound
each time the drum rotates.
To choose these options, see Chapter 10, Ma-
king own drying programs.
TEMPERATURE
You can choose temperature Normal or Low,
see chapter 10, Making own drying programs.
DRYING TIME
The drying time may be influenced by a number
of factors, such as the size of the load, the pro-
gram selected, the moisture content of the load,
the materials being washed, connection capaci-
ty and the ambient temperature and humidity.
Drying time remaining is calculated within four
minutes of the start of the drying program. The
estimated time is shown in the bottom right-
hand corner of the display, together with the –
symbol.
If the actual drying time is less than that calcu-
lated, the time display may jump ahead, e.g.
from 50 to 20 minutes, at the end of the pro-
gram.
To Next Page
Loading...
