Asko W6444A - Settings Customization; Automatic Door Opening Control; Adjusting Rinse Cycles

17
Settings
You can change the following
settings
Automatic door opening.
Extra rinses.
Door opening
If you choose Automatic door opening the
Washer door will open once the program has
nished.
1. Turn o the machine using the main power
switch.
2. Press and hold the Super rinse button and
then switch on the main power switch.
3. “AdO” is shown on the display if Automatic
door opening is activated or “AdF” if the
option has not been activated.
4. Press the Super Rinse button to change the
setting.
5. Press the Door opening button to save the
setting.
Extra rinses
Upon delivery, your washing machine is set to
use three rinses in the Normal and Everyday
wash programs. If you want to increase the
number of rinses to ve for these programs, do
as follows:
1. Turn o the machine using the main power
switch.
2. Press and hold the Delayed start button and
then switch on the main power switch.
3. The display shows "R O" if extra rinses
(5 rinses) is activated or "R F" if it is not
activated (3 rinses).
4. Turn the program selector to change the
setting.
5. Press the Door opening button to save the
setting.