Asko WM60/2 - Program WM60.1

Servicemanual WM60
10
Program WM60.1
The above table presents a few examples of the energy, water and time consumption of a few different programme
settings. Consumption can vary according to water pressure, water hardness, water supply temperature, room tem-
perature, load weight and content, variations in the power supply and selected options. In the examples provided
here the rinse setting is set to Normal and no options are selected.
Program 5 rinses
Pre-
wash
Main-
wash
Temp.
°C
Max
rpm
Max
load
kg
Rinses
num-
ber
Water
con-
sump.,
litres
Energy
kWh
Time
min
Program 1
5
Program 2
5
Program 3
X
long
long
95
60
1600
1600
5
5
5
5
80
72
1,6
0,96
166
160
Program 4
long
long
60
40
1600
1600
5
5
5
5
67
67
0,95
0,53
141
128
Program 5*
short 60 1600 5 5 67 0,92 98
Program 6**
short 40 1600 2,5 5 54 0,45 78
Program 7
short 40 1600 2,5 2 24 0,37 43
Program 8
short 40 800 2,5 3 23 0,31 74
Program 9***
short 30 800 1,6 3 68 0,49 46
Program 10
1600 2,5 1 13 0,07 18
Program 11
1600 2,5 0,06 13
Program 12
1
* This programme has been tested in accordance with EN 60456. 40°C programme for test institutes. 40°C option must be
selected.
** Short programme for test institutes. 40°C or 60°C option must be selected.
*** Synthetics programme for test institutes. The "Super rinse" option must be selected.
Program WM60.2 continuation
Program 5 rinses
Pre-
wash
Main-
wash
Temp.
°C
Max
rpm
Max
load
kg
Rinses
num-
ber
Water
con-
sump.,
litres
Energy
kWh
Time
min
Program 1*
7
Program 2
Yes long 95 1600 7 5 85 2,10 166
Tes long 60 1600 7 5 77 1,19 160
Program 3**
No long 60 1600 7 5 72 1,19 166
No long 40 1600 7 5 72 0,66 149
Program 4
No short 60 1600 7 5 72 1,15 165
Program 5
No short 40 1600 3,5 2 26 0,45 43
Program 6
No short 40 1200 3,5 2 52 0,52 80
Program 7
No short 40 800 3,5 3 31 0,39 76
Program 8
No short 30 800 2,2 3 68 0,49 46
Program 9
No 1600 3,5 1 13 0,07 18
Program 10
1600 3,5 0,06 13