Servicemanual WM60
43
Replacing panels and detergent compartment
Instructions Image
1. Unscrew the top cover.
2. Carefully press the catches that secure the
panel at the front beam. Release the catches
from the front member by working the panel
outwards.
3. Detach the panel by angling and pulling it
carefully outwards at the lower edge.
Note: Do not damage the wiring!
4. Carefully disconnect the wiring from the
control unit.
5. When removing the detergent compart-
ment, first slacken off the screw on the front
member and then the two screws holding
the detergent compartment in the side
panel.
To Next Page
Loading...
