Asko WM60/2 - Page 16

Servicemanual WM60
16
Press/
turn
LCD 2 Comments/instructions
Normal water level, Normal Water Level,
Normal water level, Normal vattennivå,
Normal vandstand, Normalt vannivå,
Normaali vedenpinta, Niveau d’eau
normal, Normaler Wasserstand, Livello
acqua normale, Nivel normal de agua,
Hoрм.урoвeнь вoд, Normaal waterni-
veau
High water level
Can be selected in programs: 3, 4, 5, 6, 7 and 8. Cannot be selected
during No spin and No draining.
With this option selected, extra water is taken in after approximately
15 minutes, the extra water is used in the main wash and rinses.
High water level, High Water Level, High
water level, Hög vattennivå, Høj vand-
stand, Høyt vannivå, Korkea vedenpinta,
Niveau d’eau élevé, Hoher Wasserstand,
Livello acqua alto, Nivel alto de agua,
Bысoкий урoвeнь вoды, Hoog waterni-
veau
Start, Start, Start, Start, Start, Start, Start,
Démarrer, Start, Avvio, Inicio, Стaрт,
Start
Delayed start (when setting: ”No Real time”)
The start of the selected program can be delayed for up to 24 hours
(in half an hour intervals). The delay and program time is shown in
the display.
Start - Done, Start-End, Start-Done,
Start-Klar, Start-Færdig, Start-Ferdig,
Start-Valmis, Démarrer-Fin, Start-Fertig,
Avvio-Fine, Inicio-Fin, Стaрт-Кoнeц,
Start-Gereed
Delayed start (when setting: ”24 Hour Clock ” or ”12 Hour Clock”)
The start of the selected program can be delayed for up to 24 hours
(in half an hour intervals). Start and end times are shown in the
display.
Start, Start, Start, Start, Start, Start, Start,
Démarrer, Start, Avvio, Inicio, Стaрт,
Start
Time program (when setting: ”No Real time”)
Desired program time can be set. Selections up to 3 hours in units of
15 minutes can be made. The selected program time is shown in the
display.
3:00
Start - Done, Start-End, Start-Done,
Start-Klar, Start-Færdig, Start-Ferdig,
Start-Valmis, Démarrer-Fin, Start-Fertig,
Avvio-Fine, Inicio-Fin, Стaрт-Кoнeц,
Start-Gereed
Time program (when setting: ”24 Hour Clock ” or ”12 Hour Clock””)
Desired program time can be set. Selections up to 3 hours in units
of 15 minutes can be made. Start and end times are shown in the
display.
Selecting options WM60.3