Asko WM60/2 - Page 26

Servicemanual WM60
26
Press/
turn
LCD 2 Comments/instructions
DataSerialNo, Data Ser Num, Data-
SerialNo, DataSerialNo, Serienummer,
Serienummer, Dataversio Nro, N° de
série, Seriennummer, Num. di serie, N°
de serie, Сeрийный нoмeр, Serienum-
mer
Date for programming the software (Year_Week)
CU date code, CU Date Code, CU
date code, CU datum kod, CU dato
kode, Styrekort prod dato, CU pvm
koodi, Code date CU, CU Datums-
code, Codice data CU, Código fecha
CU, Кoд дaты БУ, CU datacode
Control unit’s date of manufacture (Year_Week)
Software, Software, Software, Mjukva-
ra, Software, Software ver., Ohjelmisto,
Logiciel, Software, Software, Software,
Beрсия пpoг., Software
Software version number.
No. of cycles, Number of Cycles, No.
of cycles, Antal cykler , Antal cyklusser,
Antall bruk, Syklien lkm, Nb. de cycles,
Anzahl der Zyklen, Numero cicli, N° de
ciclos, Кoл-вo циклoв, Aantal cycli
Number of cycles/programs run
Press to exit the service menu
”Error_Number of cycles” Last three errors and number of cycles is shown. Total reset deletes the error indica-
tions from the system. Delete the error indications by pressing the DOOR OPENING
BUTTON and the MAIN POWER SWITCH at the same time.
”Error_Number of cycles”
”Error_Number of cycles”
Press to exit the service menu
Testing
Test valve 1, Testing Valve 1, Test valve
1, Ventiltest 1, Tester ventil 1, Test av
vannventil 1, Mg venttiilitesti 1, Essai
vanne 1, Ventil testen 1, Test valvola
1, Test válvula 1, Teст клaпaнa 1, Test
inlaatventiel 1
Inlet valve 1 is open. Pressure sensor value is shown in LCD 2.
Test valve 2, Testing Valve 2, Test valve
2, Ventiltest 2, Tester ventil 2, Test av
vannventil 2, Mg venttiilitesti 2, Essai
vanne 2, Ventil testen 2, Test valvola
2, Test válvula 2, Teст клaпaнa 2, Test
inlaatventiel 2
Inlet valve 2 is open. Pressure sensor value is shown in LCD 2.
Test valve SM, Testing Valve SM, Test
valve SM, Ventiltest SM, Tester ventil
SM, Test av vannventil SM, Mg venttiili-
testi SM, Essai vanne SM, Ventil testen
SM, Test valvola SM, Test válvula SM,
Teст клaпaнa SM, Test inlaatventiel SM
Inlet valve 1 and 2 is open. Pressure sensor value is shown in LCD 2.
Test heater, Testing Heater, Test heater,
Elementtest, Tester varmelegeme, Test
av element, Vastustesti, Essai résistan-
ce, Heizung testen, Test elem. riscald.,
Test elemento calef, Teст TЭHa, Test
verw.element
Heater is on until max 60 °C. Thermistor value is shown in LCD 2.
The options below are displayed in the order they occur in LCD 2. All display text language versions
are displayed.
Service menu WM60.3 continuation