Askoll ES2 - Operations to Start

23
USE
DE
SL
HU
EN
Engine enabling
The engine must be enabled to start.
To enable the engine, insert the key into the switch
and turn it to , then press for 3 seconds to enable
the engine, motion warning light will turn on.
To disable the engine, press the engine enabling
button again for 3 seconds and turn the key in the
ignition switch to the left on .
The engine will be disabled also by rotating the key
to .
MODE MODE
P
U
S
H
I
G
N
I
T
I
O
N
eS1 - eS2 eS3
eS1_eS2_eS3_Rev_0_EN.indb 23eS1_eS2_eS3_Rev_0_EN.indb 23 4/28/2017 9:05:11 AM4/28/2017 9:05:11 AM