48
ADJUSTMENTS AND PERIODIC MAINTENANCE
HEADLAMP BULB REPLACEMENT (eS1 - eS2)
To replace the headlamp H8 35W bulb, use a supplied
TORX T 20 wrench (under the seat), remove the 2
lateral screws under the headlamp and then follow the
procedure:
first remove the left half-shell and then the right one
turning them outwards,
eS1 - eS2
eS1 - eS2
eS1_eS2_eS3_Rev_0_EN.indb 48eS1_eS2_eS3_Rev_0_EN.indb 48 4/28/2017 9:05:17 AM4/28/2017 9:05:17 AM
To Next Page
Loading...
