Askoll ES2 - Batteries and Recharge; Charging with Battery Outboard

41
BATTERIES AND RECHARGE
DE
SL
HU
EN
Place battery and charger on a stable surface.
First, connect the charger cable to the battery
socket under the spring flap. A “click” shows correct
introduction.
Then connect the charger to the mains.
Select desired recharge mode, as shown in “BATTERY
CHARGER”.
Once charging has finished, place battery and charger
in their compartment as follows:
First place the charger on the vehicle and connect the
cable with connector to the vehicle socket.
eS1_eS2_eS3_Rev_0_EN.indb 41eS1_eS2_eS3_Rev_0_EN.indb 41 4/28/2017 9:05:15 AM4/28/2017 9:05:15 AM