What to do if the Asmoke Grill shows "ErH" error code?
If your Asmoke Grill displays an "ErH" error code, it could be due to overheating from a grease fire or excess fuel, a loose temperature probe wire, or improper shutdown. First, turn off the unit and allow it to cool. Check the temperature probe wires for damage and ensure they are firmly connected. If the issue persists, turn the unit off, wait two minutes, and then turn it back on.
Why are there no power lights on the Asmoke Grill control board?
If there are no power lights on your Asmoke Grill's control board, several factors could be the cause. Ensure the Temperature Control Dial is not off: press the Power Button to confirm it glows blue, indicating a power connection, and then turn the Temperature Control Dial to a temperature setting. Check that the unit is properly plugged into a working power source and reset the breaker. Verify the GFCI is a minimum 10 Amp service. Inspect the fuse on the control board for breaks or blackening, replacing it if necessary. Also, make sure all wire connections are firmly connected and dry. If the issue persists, the control board may need replacement, and you should contact Customer Service.
What to do if there's a lack of fuel in the Asmoke AS700P?
If your Asmoke Grill is experiencing a lack of fuel, check the hopper to ensure the fuel level is sufficient and replenish if it's low.
What to do if the meat probe is damaged in Asmoke Grill?
If you suspect the meat probe in your Asmoke Grill is damaged, check the probe wires for any signs of damage. If you notice any damage, contact Customer Service to get a replacement part.
What to do if the fire pot is blocked in Asmoke AS700P Grill?
If the fire pot in your Asmoke Grill is blocked, clear the fire pot of any moist wood pellets.
What to do if there is temperature probe grease build-up on the Asmoke AS700P Grill?
If you notice grease build-up on the temperature probe of your Asmoke Grill, check the status of the temperature probe and follow the Care and Maintenance instructions to clean it.
What to do if there is grease build-up on cooking components of Asmoke Grill?
If you find grease build-up on the cooking components of your Asmoke Grill, follow the Care and Maintenance instructions.
How to resolve insufficient air flow through the fire pot of Asmoke AS700P?
To resolve insufficient air flow through the fire pot of your Asmoke Grill, check the fire pot for ash build-up or any obstructions. Then, follow the Care and Maintenance instructions.
What to do if the wood pellet quality is poor in Asmoke AS700P?
If you suspect the wood pellet quality is poor in your Asmoke Grill, remove any moist wood pellets from the hopper and replace them with dry wood pellets.
What to do if there is insufficient air intake for fan cooking temperature in Asmoke AS700P Grill?
If there is insufficient air intake for the fan cooking temperature in your Asmoke Grill, check the fan to ensure it is working properly and that the air intake is not blocked. You might also try cooking at a lower temperature.
Critical safety precautions and potential hazards during operation and placement.
Steps for mounting wheels and assembling the grill cart.
Attaching the grill barrel to the assembled cart.
Details on different temperature settings and their uses for cooking.
Explanation of the control panel's features, displays, and buttons for operation.
Guides for priming, automatic start-up, and failure procedures.
Overview of cooking styles, temperature ranges, and meat probe usage.
General| Type | Pellet Grill |
|---|---|
| Model | AS700P |
| Fuel Type | Wood Pellets |
| Hopper Capacity | 20 lbs |
| Power Source | Electric |
| Cooking Area | 700 sq in |
| Temperature Range | 180°F - 500°F |
| Warranty | 3 years |
To Next Page
