EasyManua.ls Logo

Aspes LA25P - Detergent Residue Issues; Unusual Foam Issues; Excessive Salt Usage; Unusual Noises

Aspes LA25P
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
PROBLEMS WITH THE QUALITY OF THE WASH
75
English
Traces of detergent are left in the dispenser or on the door.
This may be because:
– One of the utensils is preventing the dispenser from opening.
– The detergent is past its expiry date or is not appropriate.
– The spray arms rub on a dish.
– The spray arm nozzles are blocked.
– The detergent container was damp when the detergent was added. The container must
be dry.
• Unusual foam appears:
You have used detergent for washing dishes by hand instead of special detergent for
dishwashers.
• The dishwashers uses a lot of salt.
This may be because:
– The lid to the salt container is not closed correctly.
– The salt consumption level is not at the correct setting.
• The dishwasher makes strange noises.
This may be because:
– The dishwasher was not installed correctly.
– The spray arms rub on a dish.
• Remains of dirt or food on the utensils
This may be because:
– The wash filter is dirty, blocked or not correctly in place.
– The spray arm nozzles are dirty or the arms are blocked by a utensil.
– The detergent is inappropriate or there is an insufficient amount.
– The utensils are not positioned correctly. Some utensils are in contact with others.
– There are too many utensils in the racks.
– The wash programme is inappropriate.
– The drain is blocked.
– The food remains on the utensils were too old and dry.
• The utensils come out white
This may be because:
– There was not enough detergent or rinse-aid.
– The salt container lid is not closed correctly.
– The salt container has no water or salt.
– The water softener is not correctly adjusted to the water hardness level.
– You have used a phosphate-free detergent. Try with detergent containing phosphate..
• The utensils do not come out dry
This may be because:
– There is no rinse-aid.
–The rinse-aid control is not set correctly.
– The utensils are positioned incorrectly.
– The utensils have been taken out too soon.
– The wash programme is inappropriate.

Table of Contents

Related product manuals