3939
3939
39
3.33.3
3.33.3
3.3
OC TOC T
OC TOC T
OC T
weakweak
weakweak
weak
er Screener Screen
er Screener Screen
er Screen
In the OC Tweaker screen, you can set up overclocking features.
BIOS SETUP UTILITY
Main
Advanced H/W Monitor Boot Security Exit
Overclocking may cause
damage to your CPU and
motherboard.
It should be done at
your own risk and
expense.
Select Screen
Select Item
Enter Go to Sub Screen
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
OC Tweaker
EZ Overclocking
Load Optimized CPU OC Setting [Press Enter]
CPU Configuration
CPU Frequency (MHz)
PCIE Frequency (MHz)
Overclock Mode
[200]
[100]
[Auto]
Spread Spectrum
Boot Failure Guard
AMD APM
Boot Failure Guard Count
CPU Active Core Control
AMD Turbo Core Technology
AMD IO C-State Support
Processor Maximum Frequency
North Bridge Maximum Frequency
x31.5 6300 MHZ
x31.0 6200 MHz
[Auto]
[Enabled]
[3]
[All Cores]
[Auto]
[Enabled]
[Auto]
Multiplier/Voltage Change
[Auto]
Load Optimized mGPU OC Setting [Press Enter]
EZ Overclocking
Load Optimized CPU OC Setting
You can use this option to load the optiomized CPU overclocking setting.
Please note that overclocking may cause damage to your CPU and
motherboard. It should be done at your own risk and expense.
Load Optimized mGPU OC Setting
You can use this option to load mGPU overclocking setting. Please note that
overclocing may cause damage to your mGPU and motherboard. It should be
done at your own risk and expense.
CPU Configuration
Overclock Mode
Use this to select Overclock Mode. The default value is [Auto]. Configuration
options: [Auto] and [Manual].
CPU Frequency (MHz)
Use this option to adjust CPU frequency.
PCIE Frequency (MHz)
Use this option to adjust PCIE frequency.
Spread Spectrum
This item should always be [Auto] for better system stability.
Boot Failure Guard
Enable or disable the feature of Boot Failure Guard.
Boot Failure Guard Count
Enable or disable the feature of Boot Failure Guard Count.
CPU Active Core Control
This allows you to adjust CPU Active Core Control feature. The configuration
options depend on the CPU core you adopt. The default value is [All Cores].
To Next Page
Loading...
Need help?
General
Weight and Dimensions
