To Next PageTo Next Page
Need help?Do you have a question about the ASROCK B760 TW/D4 V2 and is the answer not in the manual?
General| Brand | ASROCK |
|---|---|
| Model | B760 TW/D4 V2 |
| Category | Computer Hardware |
| Language | English |
Lists included motherboard accessories and cables.
Details motherboard platform, CPU, memory, expansion slots, graphics, audio, LAN, USB, and rear panel I/O.
Provides a diagram and numbering of motherboard components and connectors.
Explains the rear I/O ports, their functions, and LAN port LED indicators.
Illustrates the data flow and connectivity between major motherboard components.
Important safety and handling guidelines before installing components.
Step-by-step guide for correctly installing the CPU into the socket.
Instructions for mounting the CPU cooler and connecting its fan.
Details on how to install DDR4 memory modules and recommended configurations.
Guide to connecting case front panel wires to the system panel header.
Instructions for installing the rear I/O shield into the computer case.
Steps for physically mounting the motherboard inside the computer chassis.
Guide for installing SATA storage devices and connecting them.
Process for inserting and securing a graphics card into a PCIe slot.
Shows how to connect common peripherals like monitors, keyboards, and speakers.
Instructions for connecting the main ATX power supply cables to the motherboard.
Steps to power on the system after assembly.
Explains the function and setup of jumpers, specifically the Clear CMOS jumper.
Connects case power button, reset, and LEDs to motherboard.
Connects chassis intrusion detection and speaker.
Connectors for SATA storage devices up to 6.0 Gb/s.
Headers for connecting front panel USB 2.0 ports.
Headers for connecting front panel USB 3.2 Gen1 ports.
Connects front panel audio devices to the motherboard.
Connectors for case and water pump fans.
Connector for the CPU cooling fan.
Connector for CPU water cooler fans.
Main 24-pin connector for ATX power supply.
8-pin connector for CPU power supply.
Optional 4-pin connector for additional CPU power.
Connector for Trusted Platform Module (TPM) security.
Connector for Thunderbolt add-in cards.
Headers for connecting RGB LED lighting strips.
Headers for addressable RGB LED lighting.
Diagnoses system status (CPU, memory, VGA, storage) during boot.
Guide to installing WiFi/BT modules in M.2 slots.
Instructions for installing M.2 SSDs in the M2_1 slot.
Instructions for installing M.2 SSDs in the M2_2 and M2_3 slots.
