EPC602D8A / EPC602D8A-V+
35
English
Chapter 3 UEFI Setup Utility
3.1 Introduction
is section explains how to use the UEFI SETUP UTILITY to congure your system. e
UEFI chip on the motherboard stores the UEFI SETUP UTILITY. You may run the UEFI
SETUP UTILITY when you start up the computer. Please press <F2> or <Del> during the
Power-On-Self-Test (POST) to enter the UEFI SETUP UTILITY; otherwise, POST will
continue with its test routines.
If you wish to enter the UEFI SETUP UTILITY aer POST, restart the system by pressing
<Ct
rl
> + <A
lt
> + <De
let
e>
, or by pre
ss
i
ng t
he re
s
et but
t
on on t
he s
ys
te
m cha
s
si
s. Y
ou m
ay
also restart by turning the system o and then back on.
3.1.1 UEFI Menu Bar
e top of the screen has a menu bar with the following selections:
Item Description
Main To set up the system time/date information
OC Twea ker To set up overclocking features
Advanced To set up the advanced UEFI features
H/W Monitor To display current hardware status
Server Mgmt To manage the server
(not supported for EPC602D8A-V+)
Boot
To set up the default system device to locate and load the
Operating System
Security To set up the security features
Exit To exit the current screen or the UEFI SETUP UTILITY
Event Logs For event log conguration
Use < > key or < > key to choose among the selections on the menu bar, and
then press <Enter> to get into the sub screen. You can also use the mouse to click
your required item.
Because the UEFI soware is constantly being updated, the following UEFI setup screens
and descriptions are for reference purpose only, and they may not exactly match what you
see on your screen.
To Next Page
Loading...
