Fatal1ty FM2A88X+ Killer Series
49
English
4.3 OC Tweaker Screen
In the OC Tweaker screen, you can set up overclocking features.
Overclock Mode
Use this to select Overclock Mode. Configuration options: [Auto] and
[Manual]. The default value is [Auto].
Spread Spectrum
This item should always be [Auto] for better system stability.
AMD Turbo Core Technology
This item appears only when the processor you adopt supports this fea-
ture. Use this to select enable or disable AMD Turbo Core Technology.
[Enabled].
AMD Application power Management
Application Power Management (APM) ensures that average power con-
sumption over a thermally significant time period remains at or below
the TDP for the CPU mode being used. If [Enabled] is selected, the power
consumption is reduced when overclocking.
Processor Maximum Frequency
It will display Processor Maximum Frequency for reference.
Processor Maximum Voltage
Multiplier/Voltage Change
This item is set to [Auto] by default. If it is set to [Manual], you may adjust
recommended to keep the default value for system stability.
APU Load-line Calibration
APU Load-line Calibration helps prevent APU voltage droop when the
system is under heavy load.
To Next Page
Loading...
Need help?
General
