ASROCK Fatal1ty FM2A88X+ Killer Series - Hardware Health Event Monitoring Screen

Fatal1ty FM2A88X+ Killer Series
65
English
CPU Fan 1 & 2 Setting

On] and [Automatic Mode]. The default is value [Full On].
Chassis Fan 1 Setting

On], [Manual Mode] and [Automatic Mode]. The default is value [Full On].
Chassis Fan 2 Setting

On] and [Manual Mode]. The default is value [Full On].
Chassis Fan 3 Setting

On] and [Manual Mode]. The default is value [Full On].
Over Temperature Protection
Use this item to enable or disable Over Temperature Protection. The
default value is [Enabled].
4.6 Hardware Health Event Monitoring Screen
In this section, it allows you to monitor the status of the hardware on your system,
including the parameters of the CPU temperature, motherboard temperature, CPU
fan speed, chassis fan speed, and the critical voltage.