33
Several alarm statuses can be evaluated and signalled at the same time.
Note
The 4 green LEDs continue to flash in pairs in a diagonal sequence if the
cause of the alarm is still present after the alarm has been acknowledged.
The door can only be locked again when all alarm statuses have been re-
set and the causes of the alarm have been remedied.
Acknowledging the alarm and main alarm indicator:
gn
gn
gn
gn
Turn the key to the left.
Alarm is acknowledged.
The 4 green LEDs flash in pairs
in a diagonal sequence.
The alarm signal is indicated by
an LED sequence pattern.
(see 'Alarm signals' )...
Multiple alarm
To Next Page
Loading...