Assa Abloy 1384 - Check List - Testing before Initial Operation; Components; Installation

54
Check list - Testing before initial
operation
Individual components should be checked in a suitable way.
Description Yes No
Does installed locking element comply with guidelines
for electronic locking systems in escape route doors?
 
Do controls comply with guidelines for electronic lock-
ing systems in escape route doors?
 
Does operating device comply with guidelines for elec-
tronic locking systems in escape route doors?
 
Do you have fitting and installation instructions at
hand?
 
Do you have the form for escape door locking system
testing before initial operation at hand?
 
In the case of external power supply to the locking
system or parts thereof:
Does the power supply unit comply with EN 60 950
(does it feature the CE mark)?
 
The general installation set-up should be checked.
Description Yes No
The locking element does not limit the door headroom
to under 200 cm?
 
Does the escape door module comply with local build-
ing legislation specifications and guidelines for electri-
cal locking devices for doors on escape routes?
 
Is the 'EMERGENCY BUTTON' sign present and correctly
affixed?
 
If the locking unit is installed on fire and/or smoke
doors:
Do the locking element's position and installation type
comply with the door manufacturer's verification of
suitability specifications?
 
Components
Installation