Assa Abloy 1384 - Display TSB Address; Re-Set to Factory Settings; End Configuration Mode; Configuration Mode Switched on

41
Menu items Description Configuration
11 - Display TSB
address
ye rd
32
16 8
1
2
4
64
Binary display of the door control bus address
Please read the 'Display TSB address, description'
section.
12 - Re-set to
factory settings
ye
ye
ye
ye
The device has
been re-set to
factory settings.
 The yellow
LEDs flash
alternately in
pairs.
ye
ye
ye
ye
gn
gn
gn
gn
5 s

 Hold key in
position for 5
sec.
 A long au-
dible signal
follows.
13 - End config-
uration mode
ye
ye
ye
ye
 The yellow
LEDs flash.
Configuration
mode switched
on
ye
ye
ye
ye
 The yellow LEDs light up.
1 - Profile
rd ye
All menu items can be displayed and configured again
if you continue to turn the key switch to the left.