Assa Abloy 7220 - User Manual

7220 Concealed Vertical Rod
Installation Instructions
80-9472-0020-000 10/23
1-800-438-1951 • www.assaabloy.com
Copyright © 1999, 2013, 2023, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
WARNING
Attention Installer: Any retrofi t or other fi eld modifi cation to a fi re rated opening can potentially impact the fi re rating of the
opening, and Assa Abloy makes no representations or warranties concerning what such impact may be in any specifi c situation.
When retrofi tting any portion of an existing fi re-rated opening, or specifying and installing a new fi re-rated opening, please
consult with a code specialist or local code offi cial (Authority Having Jurisdiction) to ensure compliance with all applicable codes
and ratings.
Exit Device
All dimensions are in inches (mm) unless otherwise noted.
Top Latch
(2) 10-24 x
1/2" PRHMS
Top Tube
Top Rod
(5) Cotter Pin
(2) Set Screw #8-32
8' (2.44m) Opening
7'6" (2.29m) Opening
Deadbolt
Bottom Bolt Case
Bottom Rod
Assembly
(2) 1/4-20 X 1"
PRHMS
(Special Head)
(2) 8-32 x 5/16"
PFHUMS
Cover
Dogging Key
End Clamp
End Cap
(3) 8-32 x 5/16"
PFHUMS
(2) 1/4-20 x 1"
PPHMS
(2) E-Rings
(2) #8-32 UNC-2A X 2" PHSMS
(Assembly Aid)
790 Strike
Shim (2 supplied)
Strike Plate
791 Strike
(3) 10-24 x 3/4" PFHMS
(2) Arm & Bracket
Assembly
(2) Yoke Pin
7'2" (2.18m) Opening
(2) 10-24 x 1/2" PRHMS
7' (2.13m) Opening
Dogging
Feature to hold bolts retracted and
touchpad depressed, for push-pull
door operation.
To Dog Device
1. Insert dogging key.
2. Hold touchbar depressed.
3. Turn key 1/4 turn clockwise.
ABBREVIATION FASTENER DESCRIPTION
PPH"AB"SMS PHILLIPS PAN HEAD TYPE "AB" SHEET METAL SCREW
PRHMS PHILLIPS ROUND HEAD MACHINE SCREW
PHSMS PHILLIPS HEAD SHEET METAL SCREW
PFHUMS PHILLIPS FLAT HEAD UNDER CUT MACHINE SCREW
PFHMS PHILLIPS FLAT HEAD MACHINE SCREW
PRH"AB"SMS PHILLIPS ROUND HEAD TYPE "AB" SHEET METAL SCREW
PTH"AB"SMS PHILLIPS PHILLIPS TRUSS HEAD TYPE "AB" SHEET METAL SCREW
PPHMS PHILLIPS PAN HEAD MACHINE SCREW
PFH"AB"SMS PHILLIPS FLAT HEAD TYPE "AB" SHEET METAL SCREW

Assa Abloy 7220 Specifications