4
HES 9400 Mounted on
Hollow Metal Frame
9"
[228.6mm]
7/8"
[22.5mm]
1-3/4"
[44.5mm]
1-1/16"
[27mm]
4X
7/8"
[22.5mm]
1-5/16"
[33.3mm]
1-5/16"
[33.3mm]
4-1/8"
[104.8mm]
4-1/8"
[104.8mm]
1/2"
[12.7mm]
Clearance
for
LBM/LBSM
Wiring
Centerline
of Latchbolt
This edge
toward
door
Deadlatch Vertical Alignment.
USE this line as a reference to center deadlatch.
See note under “Preparing the Frame” on page 3.
2X
Mounting
Hole
Locations
for
1/4-20 UNC
Mounting
Screws
Final Lockdown Feature 10-32 UNF or
10-24 UNC Screw (optional)
3/4"
[19mm]
Clearance
for Power
Wiring
Frame Preparation
Patent Pending and/or patent www.assaabloydss.com/patents
Copyright © 2019, Hanchett Entry Systems, Inc., an ASSA ABLOY Group
company. All rights reserved. Reproduction in whole or in part without the
express written permission of Hanchett Entry Systems, Inc. is prohibited.
3026006.004 _2
techsupport.esh@assaabloy.com | assaabloyesh.com
800.626.7590 | 10027 S. 51
st
Street, Ste. 102 Phoenix, AZ 85044 USA
Dimensions
NOTE: Not to scale. For easy installation,
the HES 9000-MTK should be ordered.
Diagram 8
Diagram 9
HES 9000-ASB
(optional)
HES 9400 Mounted on
Aluminum Frame with Blade Stop
To Previous Page
Loading...
