Assa Abloy HES 9400 User Manual

1
HES 9400/9500/9600/9700
Electric Strike
Installation Instructions and Frame Preparation
Product Components
A 9400/9500/9600/9700 Strike Body
B 9400/9500/9600/9700 Cover
C 1/4"-20 x 1" Mounting Screws
D #10-32 & 10-24 Lockdown Screws (optional)
E #6-32 x 1/4" Cover Screws
F 5/64" Hex Key
G 12-Volt and 24-Volt Pigtails
UL1034
• Static Strength: 1500 lbs
• Dynamic Strength: 70 ft – lbs
• Endurance: 250,000 cycles
UL294 Performance Levels
• Destructive Attack: Level I
• Line Security: Level I
• Endurance: Level IV
• Standby Power: Level I
Electrical Specifications
Electrical Ratings for Solenoid
Continuous Duty 12 VDC 24 VDC
Resistance in Ohms 24 96
mA Continuous Duty 500 250
Solenoids are rated at +/- 10% indicated value.
Minimum Wire Gauge
Requirements
(Based on Round Trip)
Solenoid Voltage
12 VDC 24 VDC
200 feet or less 18 gauge 22 gauge
200 – 300 feet 16 gauge 22 gauge
300 – 400 feet 16 gauge 20 gauge
A
B
C
D
E
F
G
Diagram 1: Product Components
NOTE: Installation wiring for the product and
wiring methods shall be in accordance with the
National Electrical Code, ANSI/NFPA70

Assa Abloy HES 9400 Specifications

General

Product Type	Electric Strike
Series	HES 9400
Voltage	12/24VDC
Static Strength	1500 lbs
Holding Force	1500 lbs
Endurance	1, 000, 000 cycles
Fire Rating	3-hour fire rated
Security Grade	Grade 1
Door Type	Wood, Metal
Frame Type	Wood, Metal, Aluminum

Summary

Product Components

Electrical Specifications

Preparing the Strike

Verifying the Operation Mode

Verify that both keepers are in FAIL SECURE OPERATION.

Converting the Operation Mode

Reposition Selector Stop Pins to convert strike to FAIL SAFE OPERATION.

Preparing the Frame

Finishing the Installation

Dimensions