Assa Abloy Sargent KP8276 User Manual

A7373E
02/21
Copyright 2014. 2021, Sargent Manufacturing Company, an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written
permission of Sargent Manufacturing Company is prohibited.
KP Series
Keypad Mortise Lock
Installation & Programming
Instructions
KP

Assa Abloy Sargent KP8276 Specifications

General

Brand	Assa Abloy
Model	Sargent KP8276
Category	Locks
Language	English

Summary

Installation Instructions - Door and Lock Hand Verification

Verify Door Hand and Bevel

Steps to determine the correct hand and bevel of the door for installation.

Door Preparation and Templating

Installation - Lock Hand and Latch Adjustment

Reverse Lock Hand Orientation

Procedure to correctly orient the lock's hand for installation.

Reverse Latch Hand Orientation

Steps to reverse the latchbolt's hand for proper door operation.

Installation - Lock Body and Exterior Options

Install Lock Body into Door

Instructions for inserting and loosely securing the lock body into the door cutout.

Exterior Door Protection Options

Installation - Exterior Assembly Components

Install Outside Escutcheon and Lever Assembly

Steps to mount the outside escutcheon and lever assembly to the door.

Install Inside Escutcheon and Wiring

How to install the inside escutcheon, including connecting wires.

Installation - Interior Assembly and Final Steps

Inside Lever Installation and Securing

Attaching and securing the inside lever assembly to the lock spindle.

Cylinder Installation (KP8276/KP8278)

Front Plate and Battery Installation

Operational Checks

Basic Lock Functionality Verification

Installation Troubleshooting Guide

Programming Instructions - Introduction

User Code Structure and Roles

Explains user types, numbers, and code formats, including Master, Emergency, and Supervisory codes.

Initial Setup and Error Handling

Programming Instructions - Mode Configuration

Pharmacy (PHR) Mode Enable/Disable

Instructions to enable or disable Pharmacy (PHR) mode.

Programming Instructions - User Codes

Changing Master, Emergency, and Supervisory Codes

Procedures for modifying Master, Emergency, and Supervisory codes.

Adding Standard, Passage, and One-Time Codes

Programming Instructions - System Settings

Beep Control and Memory Clearing

Programming Instructions - Advanced Operations

Chain Programming and User Deletion

Efficiently programming multiple codes and deleting specific users.

Programming Instructions - Transaction Log

Interrogating and Understanding Transaction Log

Programming Instructions - User Management

Deleting and Disabling User Access

Setting Unlock Time and Optional Equipment

Troubleshooting Instructions

Diagnostic Self-Tests

Data Transfer Device (DTD) Diagnostics