Need help?Do you have a question about the Assa Abloy Sargent Signature Series and is the answer not in the manual?
General| Brand | Assa Abloy |
|---|---|
| Model | Sargent Signature Series |
| Category | Locks |
| Language | English |
Details on obtaining and assigning unique SARGENT Signature patterns, requiring factory pre-approval.
Explains geographical exclusivity and policy for issuing signature patterns to prevent duplication.
Requirement for end-user authorization letters for signature cylinder and key purchases.
Details on ordering different versions of the KeyWizard software package.
Specifies required and recommended system configurations for running KeyWizard software.
Details on standard key bitting and its accomplishment with industry tools.
Describes unique Signature pattern code pins, factory loaded, requiring no field servicing.
Explains the body's grooved function for offset blocking bar assemblies.
Details the function of two per cylinder blocking bars that lock out non-dimpled/bitted keys.
Describes the four springs per cylinder for offset blocking bars, ensuring proper function.
Information on SARGENT Signature cylinders with UL 437 option for drilling/picking resistance.
Lists various mortise/rim cylinder assemblies with specific lengths and part numbers.
Details different cam types, suffixes, and part numbers for use with 40 Series cylinders.
Details cylinder assemblies for bored locks, listing functions, locksets, and part numbers.
Lists cylinder assemblies for auxiliary locks (deadbolts) with part numbers.
Describes the 432 RC tool for installing and checking SARGENT LFIC Mortise Housings.
Details the 4375 keying kit for servicing SARGENT Signature cylinders, including components.
Explains the 436-1 kit for staking tools used with 10-6300 Series Cylinders manufactured after March 2006.
Lists part numbers for Signature key blanks and cut master/control keys, plus field service parts.
Information on the 437-S pinning kit for Signature cylinders and references standard cylinder service tools.
Explains permanent stamping of keys/cylinders with alpha-numeric keyset symbols for identification.
Details tamper-proof packaging for master, signature, and restricted key blanks for security assurance.
Compares Signature and Standard keyway control, highlighting Signature's feature for operating both cylinder types.
Illustrates the 'Lost Ball' method for construction master keying and its application in cylinders.
Demonstrates the process of voiding the construction key using the day/change key.
Details the registration form required for obtaining a unique SARGENT Signature pattern.
Information on the new order lead sheet that must accompany purchase orders for Signature products.
Procedure for obtaining a unique SARGENT Signature pattern, including pre-authorization and authorization letters.
Details Visual Key Control (VKC) and special key blank stamping options.
Information on the UL 437 version of Signature Cylinders for mortise and rim cylinders.
To Next Page
