Assa Abloy Sargent Signature Series - Key Control Policy; Signature Pattern Assignment Process; Geographical Exclusivity for Patterns; End-User Authorization for Purchases

1-800-727-5477 • www.sargentlock.com
Signature
®
Series
90105:D: 11/15/11 Copyright © 2007, 2009 - 2011, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
Table of Contents
Page
Signature
®
Features and KeyWizard
™
Software .................................................................................... 1
Signature Components ................................................................................................................................. 2
UL437 Mortise & Rim Cylinders ................................................................................................................. 3
Bored Locks Cylinders .................................................................................................................................... 4
10-6300 LFIC Cylinders and 6300 Series Tools .................................................................................... 5
Key Blanks .......................................................................................................................................................... 6
Visual Key Control ........................................................................................................................................... 7
Keyway Control ................................................................................................................................................ 8
Construction Master Keying ........................................................................................................................ 9
Registration Forms ........................................................................................................................................10
How to Order/Special Features. ............................................................................................................... 11
Policy
The SARGENT
®
Signature
®
patented cylinders and keys are available through the normal
channels of distribution.
Assignment of unique SARGENT Signature patterns must be pre-approved by the factory.
A letter requesting a SARGENT Code Pattern Registration Form must be sent to the Key Records
Department in New Haven, CT.
Signature patterns will be issued by predefined geographical boundaries and assigned in
accordance with a standard factory policy. This policy would not reuse the same key way
with the same Signature dimple pattern in the same state or adjacent states providing a large
area of exclusivity. For example a system in Connecticut would not be reused in New York,
Massachusetts and Rhode Island.
A letter of authorization under the letterhead of the End-User must accompany any purchase
orders for any products which involve SARGENT’s Signature cylinders and or keys.
SARGENT Signature patterns are assigned at the End-User level.
Pyramid. Cylinder & Key Control Products
* See product catalogs for more information
Absolute
Control
Keso F1 & ASSA
®
V-1 UL 437
High Security Cylinder
Extra
Control
Signature Series & Signature
with UL 437 High Security
Keso,
Restricted Keyways
Intermediate
Control
XC Patented Cylinder
Conventional Cylinders
Limited
Control