EasyManua.ls Logo

Assa Abloy SL100 User Manual

Assa Abloy SL100
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SL100 Latch Adaptor
Copyright
©
2018, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
For Installation Assistance, Call 855-594-6989 • www.assaabloyglass.us
2. Tools Needed:
Allen Keys:
5
/
64
",
1
/
8
",
5
/
32
",
3
/
16
",
1
/
4
"
• Flat Head Screw Driver
Vise Grips (Non-marring): Curved Jaw, Straight Jaw
Gasketing (Vertical Ball Joint Removal)
Table of Contents:
1. Parts List ................................................................................1
2. Tools Needed .......................................................................1
3. Applicable on Glass Door Types.....................................1
4. Remove Assembly from the Door ................................2
5. Removing Old Latch Assembly ......................................2
6. Installing SL100 Latch Adaptor ..................................3-4
7. Install Assembly on the Door ........................................5
8. Strike Installation ...............................................................5
9. Final Checks ......................................................................6-7
10. Maintenance .....................................................................7
1. Parts List:
• SL100 Latch Adaptor • Lubricant Packet
• Rockwood Manual Strike • Threadlocker
• Latch-Actuator Gauge • Fasteners
3. Applicable on Glass Door Types:
A BP P
NOT TO SCALE
Question and Answer IconNeed help?

Do you have a question about the Assa Abloy SL100 and is the answer not in the manual?

Assa Abloy SL100 Specifications

General IconGeneral
BrandAssa Abloy
ModelSL100
CategoryIndoor Furnishing
LanguageEnglish

Summary

Parts List

Tools Needed

Applicable Glass Door Types

Remove Assembly from Door

Removing Old Latch Assembly

Installing SL100 Latch Adaptor

Install Assembly on Door

Strike Installation

Final Checks

Latch Engagement

Verify minimum and maximum latch engagement for proper door function.

Tube-Strike Gap

Check the gap between the tube and strike against specified limits.

Align Actuator Gauge

Install and align the Latch and Actuator Gauge for correct operation.

Adjust Bolts

Maintenance

General Maintenance Instructions

Periodically check fasteners, reapply threadlocker, and lubricate the latch as needed.

Related product manuals