EasyManua.ls Logo

Assa Abloy TRAKA TOUCH L User Manual

Assa Abloy TRAKA TOUCH L
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
This Document is the subject of copyright and must not be copied or
otherwise reproduced either in whole or in part without the express
written permission of TRAKA.
TRAKA TOUCH L
INSTALLATION GUIDE
TD0068
03/08/18
VERSION 2.4
Question and Answer IconNeed help?

Do you have a question about the Assa Abloy TRAKA TOUCH L and is the answer not in the manual?

Assa Abloy TRAKA TOUCH L Specifications

General IconGeneral
BrandAssa Abloy
ModelTRAKA TOUCH L
CategoryEnclosure
LanguageEnglish

Summary

1. INTRODUCTION

2. PRODUCT DETAILS

2.1 ELECTRICAL RATING

Product power supply, backup, and consumption details.

2.2 ENVIRONMENTAL RATING

Operating temperature and humidity limits for the product.

2.3 COMPLIANCE LEVEL (USA/Canada & Europe)

Details on product compliance standards like ULC-S319 and UL294, covering USA/Canada and Europe.

3. SYSTEM & IFOB DIAGRAM

3.1 SYSTEM DIAGRAM AND KEY

Visual representation of system components and explanation of numbered parts.

3.2 IFOB (INTELLIGENT FOB) & KEY BUNCH DIAGRAM

3.2.1 IFOB KEY

Details on the iFob, identification tag, and security seal.

4. EXTENSION SYSTEMS OVERVIEW

5. BEFORE YOU START

5.1 MOUNTING INFO & SAFETY TIPS

Important safety information and guidance for mounting the system.

5.2 WHAT YOU SHOULD HAVE

List of items included with the Traka Touch system.

5.3 TOOLS AND MATERIALS REQUIRED FOR INSTALLATION

List of necessary tools and materials for system installation.

5.4 WALL PREPARATION

Instructions and diagrams for preparing the wall for system installation.

6. INSTALLING THE SYSTEM

6.1 REMOVING THE CABLE ACCESS PANELS (EXT. CABINETS ONLY)

Procedure for removing cable access panels on extension cabinets.

6.2 ATTACHING THE POD TO THE CABINET

Steps for attaching the control pod to the system cabinet.

6.3 ROUTING CABLES

Instructions for routing main and network cables through knockouts.

6.4 ACCESSING THE FIXING HOLES

Steps to access mounting points for securing the system.

6.5 FIXING TO THE WALL

Detailed instructions for securely mounting the system to the wall.

6.6 RE-FITTING THE CONTROL PANEL

Guide for reconnecting cables and refitting the control panel.

7. CONNECTING THE MAINS POWER

7.1 USA AND CANADA

Specific instructions for connecting mains power in the USA and Canada.

8. SWITCHING ON THE SYSTEM

9. PRODUCT DISCONNECTION

9.1 MANS DISCONNECTION

Procedures for safely disconnecting the system from mains power.

9.2 BATTERY DISCONNECTION

Instructions for safely disconnecting the backup battery.

10. MAINTENANCE

10.1 SWITCHING OFF THE SYSTEM

Safe procedure to power down the system to prevent data loss.

10.2 MANUALLY OPENING THE DOOR

Method to open the cabinet door using a master key.

10.3 SERIAL NUMBER/RATING PLATE LOCATION

How to find the serial number and rating plate on the system.

10.4 REPLACING THE FUSE IN A SURGE PROTECTION DEVICE

Steps for replacing a fuse in the surge protection module.

10.5 BACKUP BATTERY (Location, Connection, Specification)

Details on backup battery location, connection, and recommended specifications.

11. TECHNICAL SUPPORT