20
The following are the actions to trigger the reports:
Table 6 – Lifeline Report Trigger Table
Any RF Lock Operation when lock is
under the battery thresholds
Any manual/keypad Lock Operation
when lock is under the battery
thresholds or Power Cycle Lock
Change Lock Settings via Keypad
Notification Report (Access Control)
Manual or Keypad Unlock/Lock
Notification Report (Power
Management)
Any RF Lock Operation when lock is
under the battery thresholds
Any manual/keypad Lock Operation
when lock is under the battery
thresholds or Power Cycle Lock
Door Lock Operation Report
Manual or Keypad Unlock/Lock
Door Lock Configuration Report
Door Lock Configuration Set
Enable/Disable Auto-Relock Feature via
Keypad
Device Reset Locally Notification
Add/Delete User Code via User Code Set
Command
Add/Delete User Code via Keypad from
Slots 1-250
Extended User Code Report
Add/Delete User Code via Extended
User Code Set Command
Add/Delete User Code via Keypad from
Slots 251-500
User Code Keypad Mode Report
User Code Keypad Mode Set
Enable/Disable Vacation Mode or Privacy
Mode (refer to Installation Manual)
Update/Modify Master Code via Keypad