Assa Abloy Yale YRD216-ZW3 Integrator Guide

9
o 0x8103 for YRC/D622-ZW3 & YRC/D642-ZW3 (2nd Generation Fire
Rated Touch Screen Deadbolt)
o 0x8104 for YRD410-ZW3, YRD420-ZW3, YRD430-ZW3 & YRD450-ZW3
(2nd Generation Assure Deadbolt)
Table 1 - First 2 Digits of Product ID
Z-Wave™
Type
Platform
Hex Value
[0x8004/0x8002]-ZW2
0
0
0
0
0
1
1
0
0x06
[0x8004/0x8002]-ZW3
0
1
0
0
0
1
1
0
0x46
[0x8109/0x810A]-ZW2
0
0
0
0
1
1
0
1
0x0D
[0x8109/0x810A]-ZW3
0
1
0
0
1
1
0
1
0x4D
[0x8103]-ZW2
0
0
0
1
0
0
1
0
0x12
[0x8103]-ZW3
0
1
0
1
0
0
1
0
0x52
[0x8104]-ZW2
0
0
0
0
0
1
0
1
0x05
[0x8104]-ZW3
0
1
0
0
0
1
0
1
0x45
Command Class Security, Version 1
This command class has been implemented per the Z-Wave
™
Specification.
Command Class Security 2, Version 1
This command class has been implemented per the Z-Wave
™
Specification.
Command Class Device Reset Locally, Version 1*
* This command class requires security.
The Yale door locks covered in this guide can be reset to their factory default
settings by manually resetting the lock or by BLE command via app for BLE locks
(by following the procedure outlined in the specific lock’s manual).
Upon factory reset, all Z-Wave
™
network settings are cleared, all the user codes are
erased from the lock (including the master code), and all configurable settings are
reset to default values, except for the language setting. A factory reset leaves the
lock in a completely unsecure state (waiting for master code to be set), so care
should be taken if using the configuration parameter to perform a remote reset.
However, if the DUT is unenrolled/excluded from the network through the device
menu mode, then the user code database and configuration settings will not be
reset to the defaults.

Assa Abloy Yale YRD216-ZW3 Specifications

General

Brand	Assa Abloy
Model	Yale YRD216-ZW3
Category	Locks
Language	English