Need help?Do you have a question about the Associated Electrics RB10 and is the answer not in the manual?
General| Scale | 1/10 |
|---|---|
| Power Source | Electric |
| Drive Type | 2WD |
| Suspension | Independent |
| Type | Buggy |
| Width | 248mm |
| Motor Type | Brushless |
| Chassis Type | Composite |
| Tire Type | Off-road |
| Battery Compatibility | 2S LiPo/6-Cell NiMH |
Essential steps and safety guidelines for charging batteries.
Details the correct procedure for installing the battery.
Important notes and tips regarding different battery types.
Explains the correct order for powering on the transmitter and vehicle.
Guides on adjusting steering trim and understanding trigger functions.
Notes on locknut alignment and reference to gear mesh settings.
Detailed steps for removing air from shock absorbers.
Instructions for setting servo horn angle and radio trim.
How to install ESC and servo wires into the receiver box grommet.
Directs user to page 23 for gear mesh setup instructions.
Proper technique for applying glue to tire beads for mounting.
Advice for making incremental adjustments for optimal performance.
Explanation of how gearing affects performance and motor health.
Steps to correctly set gear mesh to prevent damage.
Detailed steps for setting the slipper clutch.
Instructions for setting front and rear ride heights.
How to adjust camber and camber links for handling.
Adjusting Ackermann for improved cornering stability.
To Next Page
