Associated Electrics SR10 User Manual

AssociatedElectrics.com

Associated Electrics SR10 Specifications

General

Suspension	Independent
Body Material	Polycarbonate
Chassis	Composite
Shock Type	Oil-filled
Differential	Gear
Scale	1:10

Summary

Introduction

KIT Features

Lists the key features of the SR10 RTR, highlighting advanced components and design aspects.

Quick Start Guide

Front Top Plate and Steering Build

Front Top Plate and Steering Build - Step 1

Details the initial assembly steps for the front top plate and steering components.

Front Top Plate and Steering Build - Step 2

Continues the assembly of the front top plate and steering mechanism.

Front Top Plate and Steering Build - Step 3

Finalizes the assembly of the front top plate and steering components with the chassis.

Front Suspension Build

Front Suspension Build - Step 1

Details the assembly of the first stage of the front suspension, including steering blocks and caster blocks.

Front Suspension Build - Step 2

Continues the front suspension assembly, focusing on front arms and hinge pins.

Front Suspension Build - Step 3

Assembles the front shock tower and related components for the suspension.

Rear Suspension Build

Rear Suspension Build - Step 1

Rear Suspension Build - Step 2

Gear Diff Build

Gear Diff Build - Step 1

Gear Diff Build - Step 2

Gearbox Build

Gearbox Build - Step 1

Gearbox Build - Step 2

Slipper Build

Gearbox Install

Rear Hub and CVA Build

Rear Hub and CVA Build - Step 1

Shocks Build

Shocks Build - Step 1

Shocks Build - Step 2

Electronics Build

Electronics Build - Step 1

Details the initial electronic setup, connecting the servo saver and steering link.

Electronics Build - Step 2

Continues electronics assembly by mounting the servo to the chassis.

Electronics Build - Step 3

Mounts the motor and connects it to the chassis, ensuring proper gear mesh.

Tires and Body Build

Tires and Body Build - Step 1

Tires and Body Build - Step 2