Associated Electrics SR10 - Tires and Body Build; Tires and Body Build - Step 1; Tires and Body Build - Step 2

21
:: Bumpers:: Bumpers BuildBuild - Step 4 - Step 4
:: Tires and Body Build - Step 1:: Tires and Body Build - Step 1
:: Tires and Body Build - Step 2:: Tires and Body Build - Step 2
Build x2 (front and rear)
Clean the tire and wheel bead.
Carefully apply CA glue (tire ad-
hesive) to the tire bead on both
sides. Do one side at a time,
allow it to dry before
gluing the other side!
CA glue not included!
#1597
ca glue
!
#1597
ca glue
91738
M4 Locknut,
with flange
and knurl
91738
M4 Locknut,
with flange
and knurl
71096
Wheel,
Front
71097
Wheel,
Rear
71195
Pre Glued
Wheel/Tire,
Rear
71194
Pre Glued
Wheel/Tire,
Front
25187
M3 x 14mm
BHCS
91478
M3 x 30mm
BHCS
89204
M3 x 24mm
BHCS
71042
Rear
Bumper
71042
Rear Bumper
Brace
71042
Rear Bumper
Pivot
x2x2