Astralpool OPTIMA Series - DISPLAY Functions

OPTIMA / MAYA SERIES · HEAT PUMP AIR/WATER
© FLUIDRA 2019 ALL RIGHTS RESERVED. PROPRIETARY DOCUMENT.
Pag: 35
ENGLISH
6.7 DISPLAY functions
6.8
1. Heart pump ON/OFF
Press to switch the machine ON and OFF.
2. Water temperature setpoint setting
• Press to access the water temperature setpoint for the pool.
• Change the setting by pressing or . Keep these buttons pressed to speed up
the process.
• After changing the setting, press again to save the change. To exit the setpoint
setting, press .
3. Time setting
• Press to set the time.
• Change the time using or . Press to adjust the minutes, using
or .
• After setting the time, press again to exit the time setting menu.
4. Timer setting (ECONOMIC MODE)
• Press for at least 2 seconds to activate the SCHEDULE PROGRAMMING mode.
• Press for at least 5 seconds; this will display the start and end times of the first
period.
• Change the start hour of the first period using the or keys. Press to
set the start minutes of the first period, using or . Press to set the end
time of period 1, using or . Press to set the end minutes of period 1,
using or .
• Repeat the process to program periods 2 and 3 (if necessary).