OPTIMA / MAYA SERIES · HEAT PUMP AIR/WATER
© FLUIDRA 2019 ALL RIGHTS RESERVED. PROPRIETARY DOCUMENT.
Before opening the fan, check that it is stationary.
DANGER OF INJURY BY SHARP EDEGES AND SHARP CORNERS:
Danger of injury with sharp edges and sharp corners.
Sharp edges and sharp corners on components housing parts can cause
cuts on the skin.
• When working in the vicinity of sharp edges or sharp corners,
proceed with coution.
• Wear protective gloves.
DANGER OF INJURY BY REFRIGERANT GAS:
Refrigerant gases may cause disorders in heart rate and frostbite in case of
body contact, ingestion or inhalation.
• Avoid contact with refrigerant gases.
• Works on refrigeration systems must be carried out by qualified
personnel.
• When working with refrigerants, do not eat, drink or smoke. Wash
your hands after finishing work.
• Wear all necessary protection gear: clothing, gloves, glasses ...
• Work in a ventilated place.
DANGER OF INJURY BY HOT SURFACES:
The surfaces of some components may become hot during operation of
the equipment. Contact with skin can cause severe burns.
• When working in the vicinity of hot surfaces, wear protection gear:
clothing and safety gloves.
DANGER OF INJURY BY COLD SURFACES:
The surfaces of some components may become cold during operation of
the equipment. Contact with skin can cause severe freeze-burns.
• When working in the vicinity of cold surfaces, wear protection
gear: clothing and safety gloves.
DANGER OF INJURY BY PRESSURIZED GASES:
Pressurized components of the equipment can leak fluids under high
pressure if they are handled incorrectly or in case of defect and cause
serious injuries.
• Before working with the pressurized elements, remove the
pressure.
To Next Page
Loading...
