Astralpool PROELYXP16i - Page 39

- 46 -
Remarks:
1. In heating mode, if the water out temperature is higher than the set temperature over 7℃, LED
controller displays EE04 for water over-heating protection.
2. In cooling mode, if the water out temperature is lower than the set temperature over 7℃, LED
controller displays PP11 for water over-cooling protection.
EE04 Water Overheating Protection
PP11 Water Overcooling Protection
For example as below:
Mode
Output water
temperature
Set point
temperature
Condition
Malfunction
Heating mode
36℃
29℃
Tout -Tset ≧7℃
EE04 Overheating protection for
water temperature (T2)
Cooling mode
23
℃
30
℃
Tset -Tout
≧
7
℃
PP11 Too low protection for
water temperature (T2)
8.
8.
8.
Troubleshooting
Troubleshooting
Troubleshooting