Astralpool Splasher - User Manual

Questions and Answers

B
brittany69Aug 14, 2025
Why my Astralpool Swimming Pool Vacuum SPLASHER does not move?
- B
  Brian RodriguezAug 14, 2025
  If your Astralpool Swimming Pool Vacuum (SPLASHER) isn't moving, several factors could be at play. First, ensure your pool's filtration system is operating correctly and providing sufficient suction, backwashing the filter if needed. Check all baskets (pump and weir) for debris. Inspect the diaphragm for blockages or wear, replacing it if necessary. Look for leaks in the hoses. Air bubbles at the return line indicate a suction leak. Check the outer tube/extension pipe for excessive clearance (more than +- 2mm). For older filters (+- 3 years), consider changing the sand or cleaning/changing the filter cartridge. Also, verify the vacuum lid sits flush in the weir, replacing it if damaged.
V
Victor GreenAug 17, 2025
What to do if my Astralpool Swimming Pool Vacuum SPLASHER moves a short distance then stops?
- M
  Melinda CunninghamAug 17, 2025
  If your Astralpool Swimming Pool Vacuum (SPLASHER) moves a short distance and then stops, consider the solutions for when the SPLASHER doesn't move at all. Also, the outer tube or outer extension pipe might be worn out. Strong pump suction might cause the unit to stick to the floor; adjust the flow control valve (between settings 2 and 4) to bypass water more easily.
S
stevensonlucasAug 20, 2025
Why is my Astralpool Swimming Pool Vacuum SPLASHER moving very slowly?
- R
  Ryan ValdezAug 21, 2025
  If your Astralpool Swimming Pool Vacuum (SPLASHER) is moving very slowly, verify that your pool's filtration system has sufficient suction and is operating according to the manufacturer's guidelines. Backwash the filter if needed to improve water flow and suction. If suction is strong, check that your flow control valve is working correctly, adjusting it to ensure strong water flow and reduced bypass flow. Also, check for hose leaks and proper connections.
T
Tony PadillaAug 25, 2025
Why Astralpool Swimming Pool Vacuum SPLASHER does not climb wall?
- J
  John SimsAug 25, 2025
  If your Astralpool Swimming Pool Vacuum (SPLASHER) isn't climbing the wall, ensure the baskets and cleaner are free of debris to maximize water flow, and backwash the filter. Ensure adequate suction and adjust the flow control valve to a higher setting to increase suction through the pool pump. The sand or filter cartridge may need changing or backwashing. Check if the Disc is curling; if so, replace it. The pool radius should be at least 300mm for wall climbing. Check the float chamber for buoyancy (no water should be present). Replace the outer tube or outer extension pipe if excessively worn (over 2mm play).
R
robertsdeborahAug 27, 2025
How to fix Astralpool Swimming Pool Vacuum SPLASHER that gets stuck in a particular place?
- T
  Travis JimenezAug 27, 2025
  If your Astralpool Swimming Pool Vacuum (SPLASHER) gets stuck, adjust the hose length by adding or removing a section. Make sure the aimflow nozzle isn't interfering with movement; if it is, adjust it to direct the flow away from the unit. If the issue continues, attach The Easy-Out Jogger on the first hose and insert an aimflow diverter ball in the aimflow nozzle.
N
nicolewallAug 31, 2025
What to do if Astralpool Swimming Pool Vacuum SPLASHER climbs out of the water?
- S
  Samantha RoweAug 31, 2025
  If your Astralpool Swimming Pool Vacuum (SPLASHER) is climbing out of the water, check that the flow control valve is working and free of debris. Lower the setting on the flow control valve to reduce water flow and increase bypass flow.
S
Sue LiSep 3, 2025
Why Astralpool Swimming Pool Vacuum SPLASHER is sticking on pool light?
- T
  Tyler NguyenSep 3, 2025
  If your Astralpool Swimming Pool Vacuum (SPLASHER) is sticking on the pool light, ensure the pool light doesn't protrude from the wall surface; it should be flush. If needed, remove the lens and reinstall it correctly. Alternatively, use an Easy-Out Jogger Cone.
M
Megan BullockSep 6, 2025
What to do if Astralpool Swimming Pool Vacuum SPLASHER falls on its side?
- M
  Matthew DavisSep 6, 2025
  If your Astralpool Swimming Pool Vacuum (SPLASHER) falls on its side, check if the float is filled with water and ensure that the outer extension pipe can rotate freely.
K
Kristina PetersonSep 9, 2025
What to do if Astralpool Swimming Pool Vacuum SPLASHER does not sink?
- M
  Melissa ShepherdSep 9, 2025
  If your Astralpool Swimming Pool Vacuum (SPLASHER) does not sink, make sure there is no air trapped in the hoses or the unit itself. Also, ensure that the SPLASHER has its weight in the unit.