Astralpool S5 - User Manual

Questions and Answers

A
alyssa95Jul 31, 2025
How to troubleshoot slow movement of my Astralpool S5 Swimming Pool Vacuum?
- L
  Lisa GriffinJul 31, 2025
  If your Astralpool Swimming Pool Vacuum is moving too slowly or not at all, there are several potential causes. First, ensure sufficient flow by using the included flow gauge or calculating the cleaner RPM, adjusting the flow with the regulator valve if needed. Check the cleaner itself for any trapped debris. Also, confirm that the pump has primed correctly and inspect the system for leaks that might hinder priming. Make sure there's enough flow, and backwash the filter if necessary. Verify that only the suction line connected to the cleaner is open, with all others, including the main drain, closed. Clear any obstructions from the filter, pump basket, or impeller. If the issue persists, the pool pump and filter system might be too small, and you should consult a pool professional.
M
Melissa KiddAug 4, 2025
Why Astralpool Swimming Pool Vacuum won’t climb walls?
- P
  Paul GuerreroAug 4, 2025
  If your Astralpool Swimming Pool Vacuum is not climbing the pool walls, start by checking the condition of the cleaner tires, because excessively worn tires won't provide enough grip. Also, check the water flow using the flow gauge, calculating the cleaner RPM and adjusting the flow with the regulator valve if necessary. Ensure that the leader hose is properly installed in the correct location. Finally, verify the correct placement of the hose floats.
T
Timothy RayAug 8, 2025
What to do if Astralpool S5 stays in one end of the pool?
- S
  Sylvia MooreAug 8, 2025
  If your Astralpool Swimming Pool Vacuum remains stuck at one end of the pool, begin by checking the water flow using the flow gauge, calculating the cleaner RPM, and adjusting the flow with the regulator valve as needed. Adjust the return line water flow using the provided eyeball diverter. Ensure the hose is long enough to reach all areas of the pool. Verify that the hose floats are correctly positioned. Also, ensure the swivel assembly rotates smoothly; if not, it may need cleaning.
K
Krista HallAug 13, 2025
Why does my Astralpool S5 climb too high?
- W
  wendygoodmanAug 13, 2025
  If your Astralpool Swimming Pool Vacuum climbs the wall excessively or even exits the pool, check the water flow using the included flow gauge or by calculating the cleaner RPM. Adjust the flow if necessary using the regulator valve.
J
Jacqueline CharlesAug 17, 2025
What to do if Astralpool S5 Swimming Pool Vacuum falls on its side?
- C
  carolfosterAug 17, 2025
  If your Astralpool Swimming Pool Vacuum falls on its side and recovers slowly, check the hose float placement to ensure it's correct. Verify that the leader hose is installed properly and in the correct location. Confirm that the hose is long enough to reach the furthest point in the pool. Also, the return eyeball fittings may be pushing the cleaner hoses away.
J
James FosterAug 21, 2025
Why does Astralpool S5 Swimming Pool Vacuum stay on the main drain?
- C
  Carla GreenAug 21, 2025
  If your Astralpool Swimming Pool Vacuum remains on the main drain, ensure that the main drain is closed. Also, verify that a main drain grate is installed. You may need assistance from a pool professional.
Q
qbushAug 26, 2025
How to fix Astralpool S5 Swimming Pool Vacuum right wheel that won't turn?
- W
  William MorrisAug 26, 2025
  If the right wheel of your Astralpool Swimming Pool Vacuum doesn't turn when rotated by hand, check inside the cleaner for any obstructions.

Summary

Important Warning and Safety Instructions

General Safety Information

Provides essential installation, operation, and safety guidance for installers and users.

Consumer Safety Guidelines

Details safety warnings and cautions identified by symbols for safe operation and maintenance.

General Installation Information

Pre-Installation Check List

Lists essential checks before installing the cleaner to prevent damage and ensure proper function.

Installation in Vinyl Liner Pools

Instructions for checking and preparing vinyl liner pools before cleaner installation.

Installation in Gunite;Tiled Pools

Guidance on ensuring the proper condition of gunite or tiled pools before installation.

Filter System Preparation

Emphasizes cleaning the filter and strainer basket for optimal cleaner operation.

Understanding Cleaner Coverage

Clarifies the cleaner's coverage, limitations (steps, solar covers), and initial cleanup.

Post-Installation Check

Advises on checking cleaner operation and making minor adjustments for proper performance.

Warranty Details

States the limited warranty period and directs users to the website for further details.

Pool Finish and Vinyl Liner Care

Discusses factors like age, chemistry, and installation affecting pool finishes and liners.

Owner Responsibility

States that the pool owner is responsible for the condition and maintenance of the pool's surface.

Pool Preparation and Components

Pool Preparation Steps

Outlines necessary pool preparations like chemical balance, brushing, and vacuuming.

Cleaner Components Identification

Lists and illustrates all components included in the cleaner package for verification.

Assembling the Cleaner

Hose Assembly Instructions

Provides step-by-step instructions for connecting hose sections and the leader hose.

Hose Float Placement

Instructs on installing the hose float at the correct distance above the cleaner.

Determining Overall Hose Length

Explains how to determine the total hose length required for optimal pool coverage.

Installing the Cleaner

Standard Installation Procedure

Details the standard in-skimmer installation process, including connecting the cleaner.

Skimmer Connection Steps

Guides on connecting the adapter and regulator valve to the skimmer and hose.

Optional Vacuum Line Installation

Vacuum Line Setup

Explains the optional vacuum line installation with the regulator valve in the skimmer.

Regulator Valve Function

Describes how the valve cap and regulator valve ensure correct water flow for the cleaner.

Adjusting Cleaner Performance

Flow Gauge Adjustment

Details how to use the flow gauge to adjust the regulator valve for optimal water flow.

RPM Calculation and Adjustment

Explains how to calculate and adjust cleaner RPM for optimal performance without a flow gauge.

Hose Length Adjustment

Guides on checking and adjusting hose length during cleaner operation for proper pool coverage.

Maintenance and Troubleshooting

Eyeball Diverter Installation

Explains how to use and position an eyeball diverter to manage return line flow for better performance.

Routine Inspection

Advises on visually inspecting the turbine, tires, and general condition for proper function.

Removing Debris from Turbine

Step-by-step guide on how to remove the top and turbine covers to clear debris.

Tire Removal Procedure

Details how to remove the cleaner's rubber tires by hand, warning against using tools.

Tire Installation Procedure

Guides on installing new tires onto the cleaner wheels, emphasizing hand installation.

Troubleshooting Common Issues

Provides a table with common problems and their corrective actions for optimal performance.

Summary

Important Warning and Safety Instructions

General Safety Information

Provides essential installation, operation, and safety guidance for installers and users.

Consumer Safety Guidelines

Details safety warnings and cautions identified by symbols for safe operation and maintenance.

General Installation Information

Pre-Installation Check List

Lists essential checks before installing the cleaner to prevent damage and ensure proper function.

Installation in Vinyl Liner Pools

Instructions for checking and preparing vinyl liner pools before cleaner installation.

Installation in Gunite;Tiled Pools

Guidance on ensuring the proper condition of gunite or tiled pools before installation.

Filter System Preparation

Emphasizes cleaning the filter and strainer basket for optimal cleaner operation.

Understanding Cleaner Coverage

Clarifies the cleaner's coverage, limitations (steps, solar covers), and initial cleanup.

Post-Installation Check

Advises on checking cleaner operation and making minor adjustments for proper performance.

Warranty Details

States the limited warranty period and directs users to the website for further details.

Pool Finish and Vinyl Liner Care

Discusses factors like age, chemistry, and installation affecting pool finishes and liners.

Owner Responsibility

States that the pool owner is responsible for the condition and maintenance of the pool's surface.

Pool Preparation and Components

Pool Preparation Steps

Outlines necessary pool preparations like chemical balance, brushing, and vacuuming.

Cleaner Components Identification

Lists and illustrates all components included in the cleaner package for verification.

Assembling the Cleaner

Hose Assembly Instructions

Provides step-by-step instructions for connecting hose sections and the leader hose.

Hose Float Placement

Instructs on installing the hose float at the correct distance above the cleaner.

Determining Overall Hose Length

Explains how to determine the total hose length required for optimal pool coverage.

Installing the Cleaner

Standard Installation Procedure

Details the standard in-skimmer installation process, including connecting the cleaner.

Skimmer Connection Steps

Guides on connecting the adapter and regulator valve to the skimmer and hose.

Optional Vacuum Line Installation

Vacuum Line Setup

Explains the optional vacuum line installation with the regulator valve in the skimmer.

Regulator Valve Function

Describes how the valve cap and regulator valve ensure correct water flow for the cleaner.

Adjusting Cleaner Performance

Flow Gauge Adjustment

Details how to use the flow gauge to adjust the regulator valve for optimal water flow.

RPM Calculation and Adjustment

Explains how to calculate and adjust cleaner RPM for optimal performance without a flow gauge.

Hose Length Adjustment

Guides on checking and adjusting hose length during cleaner operation for proper pool coverage.

Maintenance and Troubleshooting

Eyeball Diverter Installation

Explains how to use and position an eyeball diverter to manage return line flow for better performance.

Routine Inspection

Advises on visually inspecting the turbine, tires, and general condition for proper function.

Removing Debris from Turbine

Step-by-step guide on how to remove the top and turbine covers to clear debris.

Tire Removal Procedure

Details how to remove the cleaner's rubber tires by hand, warning against using tools.

Tire Installation Procedure

Guides on installing new tires onto the cleaner wheels, emphasizing hand installation.

Troubleshooting Common Issues

Provides a table with common problems and their corrective actions for optimal performance.

Astralpool S5 Specifications

General

Brand	Astralpool
Model	S5
Category	Swimming Pool Vacuum
Language	English

Related product manuals

Astralpool Splasher

45 pages

Astralpool Dolphin Ultrakleen

Astralpool S5 - User Manual

Table of Contents

Questions and Answers

Summary

Important Warning and Safety Instructions

General Safety Information

Consumer Safety Guidelines

General Installation Information

Pre-Installation Check List

Installation in Vinyl Liner Pools

Installation in Gunite;Tiled Pools

Filter System Preparation

Understanding Cleaner Coverage

Post-Installation Check

Warranty Details

Pool Finish and Vinyl Liner Care

Owner Responsibility

Pool Preparation and Components

Pool Preparation Steps

Cleaner Components Identification

Assembling the Cleaner

Hose Assembly Instructions

Hose Float Placement

Determining Overall Hose Length

Installing the Cleaner

Standard Installation Procedure

Skimmer Connection Steps

Optional Vacuum Line Installation

Vacuum Line Setup

Regulator Valve Function

Adjusting Cleaner Performance

Flow Gauge Adjustment

RPM Calculation and Adjustment

Hose Length Adjustment

Maintenance and Troubleshooting

Eyeball Diverter Installation

Routine Inspection

Removing Debris from Turbine

Tire Removal Procedure

Tire Installation Procedure

Troubleshooting Common Issues

Summary

Important Warning and Safety Instructions

General Safety Information

Consumer Safety Guidelines

General Installation Information

Pre-Installation Check List

Installation in Vinyl Liner Pools

Installation in Gunite;Tiled Pools

Filter System Preparation

Understanding Cleaner Coverage

Post-Installation Check

Warranty Details

Pool Finish and Vinyl Liner Care

Owner Responsibility

Pool Preparation and Components

Pool Preparation Steps

Cleaner Components Identification

Assembling the Cleaner

Hose Assembly Instructions

Hose Float Placement

Determining Overall Hose Length

Installing the Cleaner

Standard Installation Procedure

Skimmer Connection Steps

Optional Vacuum Line Installation

Vacuum Line Setup

Regulator Valve Function

Adjusting Cleaner Performance

Flow Gauge Adjustment

RPM Calculation and Adjustment

Hose Length Adjustment

Maintenance and Troubleshooting

Eyeball Diverter Installation

Routine Inspection

Removing Debris from Turbine

Tire Removal Procedure

Tire Installation Procedure

Troubleshooting Common Issues

Astralpool S5 Specifications