7
© 2016 Directed. All rights reserved.
Remote Features
1. Press and hold the button for 5 seconds, the remote emits
one long beep and the transmit LED turns ON.
2. Press the
button to access the remote operation features.
The transmit LED remains ON and the remote emits one long
beep to indicate the remote features menu is accessed. Press
the buttons indicated in the tables below to set the feature
option.
2625-TX: The confirmation LED’s next to the button indicate the
feature settings.
Feature Button Press LED ON LED OFF LED Flash
Keypad Lock
Auto OFF*
Remote Beeps
Beeps ON* Beeps OFF
Page Mode
ON* OFF Auto
Car 2 Settings
Enabled Disabled*
2615-TX: The 1-way remote will flash the transmit LED to indicate
the setting.
Feature Button Press 1 beep/flash 2 beeps/flash
Remote Beeps
Beeps ON* Beeps OFF
Keypad Lock
Auto OFF*
Car 2
Car 2 ON Car 2 OFF*
* Indicates default setting.
3. Remote programming will exit by itself after 30 seconds and the
transmit LED will turn OFF.
To Next Page
Loading...
Need help?
General
