8
© 2016 Directed. All rights reserved.
Keypad Lock
Options: OFF*, AUTO
When OFF, the buttons do not lock and always perform a command
when pressed. When set to AUTO, the remote buttons lock after a
10 second lapse between buttons presses to prevent unintentional
operations. If a button is pressed when locked the a fault tone plays
as an alert. The 2615-TX emits the fault tone only.
To unlock the buttons, press and hold the
button. The transmit LED
turns ON and tones play to confirm unlocking.
Page Mode
Options: ON*, OFF, AUTO
Paging is how the 2625-TX remote monitors your system’s messages.
AUTO extends battery life by turning Paging OFF after one minute if
the remote control is not used during this period. Just press any button
to resume system monitoring. When set to ON it wakes up every few
seconds to listen for pages from the system. When set to OFF it does
not wake up to receive alarm trigger pages.
Note: When OFF, responses are still received when a command is
performed and when remote start has been activated but alarm trigger
pages will not be received.
Car 2
Options: OFF*, ON
The 2625-TX and 2615-TX remote controls can control two systems
independently. When set to OFF, the Car Select feature is not
available. When set to ON the Car Select feature is enabled. See
“Car Select” (under Remote and System Operations) for detail on
using a remote with two systems.
To Next Page
Loading...
Need help?
General
