5
© 2017 Directed. All rights reserved.
Getting Started
Your 5325-TX remote is powered by an internal rechargeable battery that
can only be serviced by an authorized AstroStart dealer. Due to transit and
storage time prior to your purchase, the battery charge may have depleted. To
ensure proper operation, check the battery level and if not fully charged, use the
provided cable to connect to the USB port on a PC/Laptop or a USB power
adapter. See “Battery Information (5325-TX)” on page 18 and “Status Screen
Icons” on page 8 for more information about the battery.
Charging the remote control:
Plug the USB end of the provided USB cable into the USB port on a computer
or a USB power adapter. Insert the micro-USB connector into the micro-USB port
located on the side of the remote control. The text field will display
CHARGE
to indicate the remote control is charging (The remote remains operational while
charging and can command the system).
Once fully charged the text field will display
FULL
.
The remote control is then ready for use. Disconnect the cable from the remote
control end first.
Note
If the battery is excessively depleted when charging, functionality
may be delayed while it charges to the minimum voltage required to
operate the display, after which normal charging resumes.
To Next Page
Loading...
Need help?
General
