4
© 2017 Directed. All rights reserved.
2-way communication
Throughout this guide, there are references to 2-way communication and/or
confirmation of commands via the 2-way remote control. Please note that your
system may not be equipped with a 2-way remote control so such feedback will
not apply. If you would like to upgrade to a 2-way remote control, please see
your authorized AstroStart dealer. Additional parts and labor may apply.
Getting Started
Keys to using this manual
• Specific actions (in bold type) and style conventions are used consistently
throughout this manual, they are as follows:
• Press
: implies pushing in and the remote will play the transmit beep to
send the command.
• Hold: is used after Press actions. The remote will play a second set of
transmitter beeps to inform the user that the other sets of command will be
transmitted.
• An asterisk (*) when used after a word or phrase denotes that additional
details can be found in related sections usually noted at the bottom of the
page or end of the section.
• Confirmation LED’s are identified by the command/function button they
are associated with.
To Next Page
Loading...
