AstroStart DSP625 User Manual

8
© 2017 Directed. All rights reserved.
Basic Commands
Arm/Lock
Press and release
The vehicle doors lock, siren/horn sound, parking lights flash, and alarm*
features are enabled. The 2-way remote control confirms by using LED and tone.
If an alarm zone is active (e.g. door is open) an alert message will follow. If
a Valet mode is enabled the 2-way remote control confirms by using LED and
tones accordingly.
Panic Mode
Press and hold
The system arms/locks, then two seconds later begins the Panic output. The
2-way remote control confirms by using LED and tones. Press the
or button
to stop the panic output anytime.
Disarm/Unlock
Press and release
The vehicle doors unlock, siren/horn sound, parking lights flash, and alarm*
features are disabled. The 2-way remote control confirms by using LED and tone.
If an alarm trigger has occurred an alert message will follow. If a Valet mode is
enabled the 2-way remote control confirms by using LED and tones accordingly.
Status
Press and release (2-way remote control 2625-TX only)
The remote will generate a report status using the confirmation LED and tones
once to display the system’s current status (Lock, Unlock, Engine is running).
Trunk
Press and hold
The trunk opens (if connected) when this button is pressed for
4 seconds. The 2-way remote control (2625-TX) confirms by LED and tones.
* Available for systems with security features only.

AstroStart DSP625 Specifications

General

Brand	AstroStart
Model	DSP625
Category	Remote Starter
Language	English