Asus HA3281A - Attaching the Stand (Arm;Base)

2-2
Chapter 2: Setup
2.2 Attaching the stand (arm/base)
To assemble the stand:
1. Carefully take the monitor out of the box. Hold the monitor rmly and do
not press on the panel screen when lifting to avoid any accidental damage
(Figure 1).
2. Place the monitor face down on the table, and then use a paper clip (or a
similar object) to remove the rubber cushions in the screw holes and remove
the mini stands (Figure 2).
3. Install the arm and secure it using the screws (Figure 3).
4. Install the base to the arm. Then lift the screw ring and turn it clockwise to
secure the base in place (Figure 4).
(Figure 1)
(Figure 4)
(Figure 3)
(Figure 2)